TM 9--2520--215--34
BRAKE APPLY REACTION PLATES AND RELATED PARTS REPAIR
CONTINUED
0041 00
ASSEMBLY Continued
10. Install spacer (2) and new snap ring (1). Spacer has internal notch which must engage dowel pin in brake apply
shaft (3).
11. Install new hook--type seal ring (14) into groove on hub of sleeve (15).
12. Install new preformed packing (19) into outer groove of saddle (12).
1
2
12
3
14
19
15
NOTE
FOLLOW--ON MAINTENANCE:
Install output reduction unit
(TM 9--2350--292--20).
END OF TASK
0041 00--7/8 blank