TM 9--2520--215--34
0043 00--3
OUTPUT REDUCTION GEAR PLANETARY CARRIER ASSEMBLY AND
BRAKE HOUSING ASSEMBLY REPLACEMENT – CONTINUED
0043 00
REMOVAL – Continued
4. Place assembly in fabricated stand. Remove brake housing assembly (5), 18 pins (6), 18 snap rings (7) and18
springs (8). Remove nut (2) and seal ring (9). Discard snap rings and seal ring.
5. Install adapters in output reduction gear carrier assembly (10) lifting holes and loosen output reduction gear
planetary carrier assembly (10) for removal. Remove output reduction gear planetary carrier assembly (10).
