TM 9--2520--215--34
0041 00--6
BRAKE APPLY REACTION PLATES AND RELATED PARTS REPAIR
CONTINUED
0041 00
ASSEMBLY Continued
CAUTION
Use care when pressing to prevent damage to seal rings.
7. Press sleeve (15) into saddle (12). Install six new lockwashers (17) and six screws (16) to retain it.
8. Install needle bearing (8) and two new seals (7) in brake apply lever (4). Coat needle--bearing (8) with white lead.
Press only on numbered side of needle bearing (8). Locate needle--bearing (8) centrally in bearing bore. Press
two new seals (7) in lip, sides toward needle bearing (8) until flush with brake apply lever (4).
NOTE
On the left assembly, install brake apply lever onto assembly before installing lever assembly.
Spacer is not used on left assembly.
9. Install brake apply lever (20) and spacer (5). Spacer must be between outer bearing and lever assembly. Hold
these parts in position and install brake apply lever (3).
12
5
7
8
7
3
16
17
4
LEFT SIDE ONLY
15
4
20