TM 9--2520--215--34
INPUT PRESSURE OIL PUMP ASSEMBLY REPAIR -- CONTINUED
0058 00
ASSEMBLY
1. Tap two needle bearings (7) into pump body (8) and two needle bearings (7) into cover assembly (2). Install
dowel pins (9) into cover assembly (2).
2. Lock needle bearings (7) in place with two flat washers (6) and two bolts (5).
3. Install internal drive gear (4) short--end first and idler gear (3) in body assembly (8).
4. Place pump cover assembly (2) on body assembly (8). Align dowel pins (9) in cover assembly (2) with holes in
body assembly (8).
5. Install two bolts (1) and tighten bolts to 46--52 lb--ft torque.
7
7
7
7
6
5
1
4
3
8
2
5
6
9
9
NOTE
FOLLOW ON MAINTENANCE:
Install input pressure pump (WP 0057 00)
END OF TASK
0058 00--3/4 blank
