TM 9--2520--215--34
0060 00--1
TORQUE CONVERTER LOCKUP CLUTCH ASSEMBLY AND RELATED PARTS
REPAIR
0060 00
THIS WORK PACKAGE COVERS:
Disassembly, Cleaning, Inspection, Fit and Wear Limits, Assembly
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0088 00)
Compressor assembly (item 6, WP 0088 00)
Materials/Parts
Retaining ring (item 48, WP 0087 00)
Spring pin (item 49, WP 0087 00)
Preformed packing (item 50, WP 0087 00)
Equipment Conditions
Torque converter lockup clutch removed
(WP 0059 00)
DISASSEMBLY
1. Drive spring pin (1) into backplate (2) until flush with rear of backplate (2). Install compressor assembly and
depress backplate until pressure on snap ring (3) is relieved, remove snap ring (3). Discard snap ring.
2. Release compression on backplate (2). Remove two compressor assembly bolts (4). Install 3/8--16 puller bolts
(with nuts) (5) through compressor bar into backplate (2). Remove backplate (2) by tightening nuts, alternating
from side to side.