TM 9--2520--215--34
0059 00--3
TORQUE CONVERTER LOCKUP CLUTCH ASSEMBLY AND RELATED PARTS
REPLACEMENT -- CONTINUED
0059 00
INSTALLATION
1. Install pin into lockup clutch assembly (4). Position lockup clutch assembly (4) so that pin aligns with hole in
converter pump (5) and with access hole at rear of housing (3). Lower lockup clutch assembly (4) onto converter
pump (5).
2. Hoist housing (3) partially upward and remove pin from access hole (2). Install two bolts (6) into opposite holes in
housing (3) (rotate converter pump -- half turn after first bolt is installed).
