TM 9--2520--215--34
0064 00--7
TORQUE CONVERTER AND RELATED PARTS REPAIR – CONTINUED
0064 00
FIT AND WEAR LIMITS
Check the following parts to the dimensions listed. Replace if not within the specified dimensions.
PART NAME
CHECK POINTS
ACCEPTABLE LIMITS
Ball bearing
Stator thrust washer retainer
First stator thrust washer
Stator cam roller
First and second stator thrust
washer (inner)
First and second stator thrust
washer (outer)
Second stator thrust washer
Cam roller race
Pump bearing support
Ball bearing
Bearing ID
Bearing fit on clutch drive hub
Bearing OD
Bearing fit in roller race
Thickness of retainer
Thickness of first stator thrust washer
Roller OD
Thickness of inner washer
Thickness of outer washer
Thickness of second stator washer
Roller race OD
Front roller race ID
Support ID
Bearing support fit
Bearing OD
Bearing fit in support
Bearing ID
Bearing fit in sleeve
3.1490 to 3.1496 in.
0.001T to 0.0001 in.
5.5110 to 5.5118 in.
0.0002T to 0.0016L
0.2640 to 0.2670 in.
Wear limit: 0.2620 in
0.0600 to 0..620 in.
Wear limit:0.0590 in.
0.4998 to 0.5000 in.
Wear limit:0.4996 in.
0.0500 to 0.0520 in.
Wear limit:0.0590 in.
0.0600 to 0.0620 in.
Wear limit:0.0590 in.
0.0600 to 0.0620 in.
Wear limit:0.0590 in.
6.3740 to 6.3750 in.
Wear limit:6.3740 in.
5.5116 to 5.5126 in.
Wear limit:5.5131 in.
5.9055 to 5.9069 in.
Wear limit:5.9075 in.
0.0001t to 0.0022L
5.9047 to 5.9055 in.
0.001T to 0.0022L in.
2.7553 to 2.7559 in.
0.001T to 0.0011L
