TM 9--2520--215--34
0064 00--5
TORQUE CONVERTER AND RELATED PARTS REPAIR – CONTINUED
0064 00
DISASSEMBLY – Continued
NOTE
Do not disassemble first or second stator assemblies further unless replacement of parts is
necessary. If replacement is necessary, perform steps 10 and 11. These procedures apply to
both assemblies.
10. Remove 18 screws (20) from each stator assembly. Discard screws.
11. Press stator cam (21) and thrust washer (22) out toward flat side of stator. Use a round press tool which will clear
bore of stator, but will seat on thrust washer.
12. Remove 12 self--locking bolts (23) which retain accessory drive gear (24). Remove gear (24) from converter
pump (25). Discard self--locking bolts.
