TM 9--2520--215--34
0077 00--9
OUTPUT DRIVE SHAFT AND RELATED PARTS REPAIR – CONTINUED
0077 00
ASSEMBLY
1. Install spanner nuts (2) over smaller diameter end of shaft. Thread first nut, chamfered side first, completely over
first threads on shaft, down far enough to thread second nut, chamfered side out, fully on to first threads.
2. Install coolant pump drive gears (14), recessed--end first, over long--splined end of shaft (3). Position gear
against spanner nut (2).
3. Install large roller bearing (15), if removed coat gear (5) with white lead. Press bearing, large diameter first onto
hub.
