TM 9--2520--215--34 0077 00--5 OUTPUT DRIVE SHAFT AND RELATED PARTS REPAIR – CONTINUED 0077 00 FIT AND WEAR LIMITS Check the following parts to the dimensions listed.  Replace if not within the specified dimensions. PART NAME CHECK POINTS ACCEPTABLE LIMITS Output drive shaft Steer bevel driven gear Double--row ball bearing Roller bearing Steer bevel driven gear bearing race Steer bevel driven gear needle bear- ing Right bearing retainer Roller bearing assembly Bearing surface diameter on shaft Bearing race fit on shaft Bearing surface OD on shaft Bearing fit on shaft Larger ID of gear Bearing fit in gear Smaller ID of gear Bearing race and roller fit in gear Bearing OD Bearing fit in gear Bearing ID Bearing fit on shaft Bearing cone ID Bearing fit in shaft Bearing race OD Bearing fit in retainer Bearing race OD Bearing race ID Bearing fit on shaft Roller OD Bearing surface ID of retainer Bearing race OD Bearing race fit in housing bores Bearing race ID Fit of inner race in outer race Bearing ID Bearing fit on gear OD of roller of inner race Fit of inner race in outer race 3.1490 to 3.1496 in. Wear limit: 3.1487 in. 0.0006T to 0.0006L 3.0010 to 3.0015 in. Wear limit: 3.0007 in. 0.0015T to 0.0000 in 5.5109 to5.5119 in. Wear limit: 5.5125 in. 0.009T to 0.0009L 3.9092 to 3.9102 in. Wear limit: 3.9113 in. 0.0015L to 0.0034L 5.5110 to 5.5118 in. 0.009T to 0.0009L 3.1490 to 3.1496 in. 0.006T to 0.0006L 3.0000 to 3.0010 in. 0.0015T to 0.0000 in. 5.5115 to 5.5125 in. 0.0010T to 0.0030T 3.6572 to 3.6577 in. Wear limit: 3.6562 in. 3.1490 to 3.1496 in. 0.006T to 0.0006L 0.1248 to 0.1250 in. Wear limit 0.1243 in. 5.5095 to 5.5105 in. Wear limit: 5.5110 in. 3.1491 to 3.1496 in. 0.005T to 0010L to 2.6756 in. 0.0017L to 0.0026L 1.3775 to 1.3780 in. 0.0003T to 0.0013T 2.6730 to 2.6734 in. 0.0017L to 0.0026L