TB 43-0213
n. Rustproofing Front Floor (see Figure 5-25).
(2) Insert 90 degree short tool in holes A and B
Insert 90 degree short tool in hole A on front floor and
on the rear floor and spray in all directions.
spray in all directions.
(3) Plug hole C.
p. Rustproofing Roof and Doorjamb Tops (see
(1) Insert 90 degree short tool in top of
doorjamb holes A, B, C, and D and in holes E, F, G,
and H in roof, and spray in all directions.
(2) Insert 90 degree short tool in sunvisor
access hole as far as possible and spray in all directions
while slowly withdrawing tool.
TA504814
Figure 5-25. Rustproofing Front Floor.
TA604816
Figure 5-27. Rustproofing Roof and
0, Rustproofing Rocker Panels and Rear Floor (see
Doorjamb Tops.
(3) Insert flexible tool as far as possible into the
(1) Insert 90 degree short tool into hole C in the
domelight access hole in the roof aid spray in all
rocker panel as far as possible, then spray in all
directions while slowly withdrawing tool. Do this step
directions while slowly withdrawing tool.
twice, once to the left and once to the right.
(4) Insert short rigid tool into all openings and
holes A through H and spray all areas not covered by
the 90 degree tool.
(5) Plug holes A through H.
q. Rustproofing Rear Window Frame (see Fig-
ure 5-28).
(1) Insert 90 degree short tool in rear window
frame holes A, B, C, D, and E as far as possible, then
spray in all directions while slowly withdrawing tool.
(2) Insert flexible tool in rear window frame
holes F as far across as possible, then spray in all
TA504815
directions while slowly withdrawing tool.
Figure 5-26. Rustproofing Rocker Panels
and Rear Floor.
(3) Plug holes A through E.
5-11
