TB 5-2520-551-24
PTO UNIT (cont.)
On firewall, locate insulation knockout 6" above upper mounting screws of
20.
accelerator pedal and 4" right of steering column support bolts. Remove
and discard insulation knockout. Mark center of hole using center punch.
Using electric drill with 1/8" drill bit, drill pilot hole in firewall.
21.
Using electric drill with .375" drill bit, drill hole in firewall.
22.
On rear of instrument panel cover, using 7mm wrench, remove and discard
23.
bolt and bracket securing radio block-off cover.
10