TB 9-2350-368-25
17. Install right brake connecting links, two screws, lockwashers, and flat washers on right transmission
brake. See Figure 4-6.
CAUTION
Do not use screws removed from transmission. Damage
of screws may damage transmission.
18. Remove two screws from the right side of transmission. Save transmission screws. Install brake stall
test tool (Figure 2-28), secure with two screws. Connect brake stall test tool to braking hardware. Use
rod-end clevis and rod-end connector. Connect rigid connecting link between two 1/4 inch steel plates
and secure with headed pin, washer, and cotter pin. See Figure 4-6.
19. Fill engine and transmission with oil. Refer to LO 9-2350-277-12 (M113A3 FOV) or LO 9-2350-247-12
(M548A3).
