TM 9--2520--215--34
STEER CLUTCH HOUSING ASSEMBLY REPLACEMENT – CONTINUED
0038 00
INSTALLATION – Continued
NOTE
Mounting bolts securing the left steer--clutch housing assembly are tightened to 32--38 lb--ft
torque (43.4--51.5 NSm). Mounting bolts securing the right steer--clutch assembly are
tightened to 67--80 lb--ft torque.
2. Install two ½ --13 x 3 --1/4 bolts (1) three ½ --13 x 2 -- 3/4 bolts (1), and install 14 remaining bolts (1), and 18 new
lockwashers (2) into right steer--clutch housing (3). Tighten mounting bolts to 67--80 lb--ft torque.
1
2
3
1
2
1
2
NOTE
FOLLOW ON MAINTENANCE:
Install inspection hole cover and gasket
(WP 0036 00).
Install steer control valve body assembly
(WP 0026 00).
END OF TASK
0038 00--3/4 blank
