TM 9--2520--215--34
0039 00--1
STEER CLUTCH HOUSING ASSEMBLY REPAIR
0039 00
THIS WORK PACKAGE COVERS:
Disassembly, Cleaning, Inspection, Fit and Wear Limits, Assembly
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0088 00)
Electric hand drill (item 38, WP 0088 00)
Drill set twist (item 39, WP 0088 00)
Arbor press hand (item 26, WP 0088 00)
Eyebolt (item 33, WP 0088 00)
Deadblow hammer (item 47, WP 0088 00)
Welders gloves (item 46, WP 0088 00 )
Torque wrench (0--600) (item 34, WP 0088 00)
Torque wrench (0--175) (item 29, WP 0088 00)
Compressor assembly (item 6, WP 0088 00)
Materials/Parts
White lead (item 19, WP 0085 00)
Oil soluble grease (item 2, WP 0085 00)
Preformed packing (item 29, WP 0087 00)
Preformed packing (item 30, WP 0087 00)
Woodblock (item 24, WP 0085 00)
Preformed, packing (item 94, WP 0087 00)
Retaining ring (item 118, WP 0087 00)
Seal assembly (item 123, WP 0087 00)
Material/Parts -- Continued
Dry ice
Petrolatum (item 15, WP 0085 00)
Retaining ring (item 87, WP 0087 00)
Retaining ring (item 89, WP 0087 00)
Retaining ring (item 90, WP 0087 00)
Seals ring (2) (item 88, WP 0087 00)
Self--locking bolts (32) (item 91, WP 0087 00)
Self--locking bolts (32) (item 120, WP 0087 00) (For
left steer clutch)
Dowel pin (item 92, WP 0087 00)
Pin (item 93, WP 0087 00)
Seal (item 121, WP 0087 00)
Self--locking bolts (2) (item 124, WP 0087 00)
Equipment Conditions
Steer clutch housing assembly removed from
transmission (WP 0038 00)
DISASSEMBLY
1. Remove snap ring (1) and output coupling (2). Remove hook--type seal ring (3) from base of coupling. Discard
snap ring and seal ring.
2. Position steer clutch housing assembly (4) on wood blocks, using a soft hammer or mallet, drive out planetary
carrier assembly (5). Approximately one--inch downward movement will free the carrier assembly.
1
3
2
4
5
