TM 9--2520--215--34
0039 00--2
STEER CLUTCH HOUSING ASSEMBLY REPAIR – CONTINUED
0039 00
DISASSEMBLY – Continued
3. Remove housing from carrier assembly and position the housing gears upward, on bench. Remove 32
self--locking bolts (6) and output planetary sun gear (7). Discard self--locking bolts.
6
7
4. Install compressor assembly and tighten the attaching bolts until steer tie--shaft drive gear (8) moves downward
1/8 to 3/16 inch. Tap steer tie--shaft gear ball bearing (9) downward with a soft hammer or mallet until the snap
ring (10) can be removed. Remove and discard snap ring.
9
10
8
