TM 9--2520--215--34
0039 00--6
STEER CLUTCH HOUSING ASSEMBLY REPAIR – CONTINUED
0039 00
DISASSEMBLY – Continued
11. Using two screws (15) which retained the clutch pressure plate, lift out apply ring assembly (22).
NOTE
Do not remove ball bearing unless replacement is necessary.
12. Remove spacer (25) from apply ring (22) assembly. Remove ball bearing (26). Remove seal ring (27) (hidden)
from groove in clutch piston (28). Remove expander (29). Remove preformed packing (30) from groove in apply
ring (22). Discard preformed packing and seal ring.
22
30
15
29
28
26
25
27
13. Remove hook--type seal ring (31) from housing (4) hub. Discard seal ring.
4
31
