TM 9--2520--215--34
OUTPUT REDUCTION GEAR OUTPUT SHAFT HOUSING AND RING GEAR
ASSEMBLIES REPLACEMENT – CONTINUED
0045 00
INSTALLATION – Continued
4. Place housing assembly (2) into fabricated stand. Install planetary carrier assembly (12).
5. Install ring gear assembly (1) aligning two dowel pins (13) with holes in housing assembly (2). Shoulder (14) of
ring gear assembly (1) must be up.
NOTE
FOLLOW ON MAINTENANCE:
Install output reduction planetary
carrier assembly (WP 0043 00)
END OF TASK
0045 00--5/6 blank
