TM 9--2520--215--34
0047 00--1
OUTPUT REDUCTION GEAR OUTPUT SHAFT AND RELATED PARTS REPAIR
0047 00
THIS WORK PACKAGE COVERS:
Disassembly, Cleaning, Inspection, Fit and Wear Limits, Assembly
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0088 00)
Arbor press (item 26, WP 0088 00)
Oil seal replacer (item 16, WP 0088 00)
Stud remover/setter (item 50, WP 0088 00)
Materials/Parts
Seal assembly (item 83, WP 0087 00) (For
XT--1410--5A)
Seal assembly (item 123, WP 0087 00) (For
XT--1410--4)
Preformed packing (item 84, WP 0087 00)
Preformed packing (item 85, WP 0087 00)
Grease (item 2, WP 0085 00)
Lint--free paper (item 25, WP 0085 00)
Dry--cleaning solvent (item 1, WP 0085 00)
Gasket (item 122, WP 0087 00)
Equipment Conditions
Output reduction gear output shaft and related parts
removed (WP 0045 00)
DISASSEMBLY
1. Insert three equal lengths of 3/8 inch diameter drill rod into three holes in flange of output shaft assembly (1).
2. Place suitable plate on three pieces of drill rod. Press out roller bearing (2), output shaft bearing cap (3), seal
assembly (4) and spacer (5) as an assembly from output shaft assembly (1).
