TM 9--2520--215--34
0046 00--2
OUTPUT REDUCTION GEAR OUTPUT SHAFT HOUSING AND RING GEAR
ASSEMBLIES REPAIR --CONTINUED
0046 00
CLEANING
See WP 0018 00 for cleaning procedures.
INSPECTION
See WP 0018 00 for general inspection and repair recommendations.
FIT AND WEAR LIMITS
Check the following parts to the dimensions listed. Replace if not within the specified dimensions.
PART NAME
CHECK POINTS
ACCEPTABLE LIMITS
Output shaft bearing
Housing large bearing surface ID
Bearing fit in housing
Housing small bearing surface ID
Bearing fit in housing
10.2352 to 10.2370 in.
Wear limit: 10.2380 in.
0.0010T to 0.0022L
9.0551 to 9.0569 in.
Wear limit: 9.0579 in.
0.0000 to 0.0030L
ASSEMBLY
1. On the XT--1410--4 transmission, install bearing (3) in output shaft housing (2). Seat race against shoulder in
housing bore.
2. On the XT--1410--5A transmission, install bearing (3) with manufacturer’s identification number facing out. Seat
race firmly against shoulder in housing bore.
1
2
3
NOTE
FOLLOW--ON MAINTENANCE:
Install output reduction gear shaft and related
parts (WP 0045 00).
END OF TASK
