TM 9--2520--215--34
0047 00--3
OUTPUT REDUCTION GEAR OUTPUT SHAFT AND RELATED PARTS REPAIR
– CONTINUED
0047 00
CLEANING
WARNING
Dry--cleaning solvent used to clean parts in potentially dangerous to personnel and property.
Do not use near open flame or excessive heat. Flash point of dry--cleaning solvent is 138
degrees F.
Compress air used for cleaning purposes will not exceed 30 psi. Use only with effective
chip--guarding and personal protective equipment (goggles/shield, gloves, etc,).
Thoroughly clean output shaft assembly (1), particularly the ten tapped holes (11) on the XT--1410--4A or 12 holes in
the XT--1410--5A transmission by washing in dry--cleaning solvent, blow dry with compressed air. See WP 0018 00
for additional cleaning procedures.
1
11
XT---1410---4 TRANSMISSION
