TM 9--2520--215--34
0049 00--1
OUTPUT REDUCTION GEAR BRAKE HUB ASSEMBLY REPLACEMENT
0049 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0088 00)
Lifting sling (item 18, WP 0088 00)
Suitable lifting device (2000 lb minimum capacity)
Compressor assembly (item 6, WP 0088 00)
Torque wrench (item 34, WP 0088 00)
Fabricated stand (figure 2, WP 0089 00)
Retaining ring pliers set (item 27, WP 0088 00)
Materials/Parts
Snap ring (item 104, WP 0087 00)
Flat washer (item 102, WP 0087 00)
Retainer packing (item 103, WP 0087 00)
Equipment Conditions
Brake apply reaction plate assembly and retainer plate
removed (WP 0040 00)
REMOVAL
NOTE
Output reduction gear assemblies of the XT--1410--5A do not contain
studs for mounting the sprockets.
Disassembly procedures for the right and left output reduction gear
assemblies are identical. Only the left assembly is illustrated.
1. Flatten tab on flat washer (1), remove bolt (2), flat washer (1) and retainer packing (3) with steel ball. Discard flat
washer and retainer packing.
