TM 9--2520--215--34
0047 00--9
OUTPUT REDUCTION GEAR OUTPUT SHAFT AND RELATED PARTS REPAIR
– CONTINUED
0047 00
ASSEMBLY – Continued
14. Reverse oil seal replacer on output shaft assembly (1) with large end against spacer (5). Prepare new seal
assembly (4) sealing faces by wiping with lint--free paper dipped in quick-- drying solvent (item 20, WP 0085 00).
Dry both faces of seal assembly (4) with lint--free paper, using a clean sheet for each face.
15. Pour transmission oil on sealing faces of seal assembly (4). Do not touch sealing faces with hands.
16. Lubricate new preformed packing (7) and outside diameter groove of seal assembly (4) with oil soluble grease.
Install spring--loaded portion of seal assembly (4) on output shaft assembly (1). Remove oil seal replacer.
1
5
4
7
17. Place outer seal ring (12) over output shaft assembly (1) and onto output shaft assembly (1) flange face.
Assemble cap (14) over new preformed packing (7) on outside diameter of spring--loaded portion of seal
assembly (13). Align holes in cap (14) with lugs on seal assembly (13).
1
7
14
13
12
