TM 9--2520--215--34
0067 00--2
TORQUE CONVERTER TURBINE SHAFT ASSEMBLY REPLACEMENT –
CONTINUED
0067 00
INSTALLATION
NOTE
If repairing the XT--1410--4 transmission perform Installation steps 1 and 2. If repairing the
XT--1410--5A transmission perform Installation steps 1 and 3.
1. Use a 3/4--16 eyebolt to install converter turbine shaft assembly (2). Proceed carefully, rotating converter turbine
shaft assembly (2) while lowering.
2. Install eight bolts (1) into converter turbine shaft assembly (2).
3. Working through slots in intermediate--range sun gear (3), install new snap ring (4) into groove of low--range
planetary carrier.
NOTE
FOLLOW ON MAINTENANCE:
Install intermediate range planetary carrier
assembly (WP 0065 00)
END OF TASK
