TM 9--2520--215--34
0020 00--1
DETERMINING NOMINAL SHIMS FOR OUTPUT BEVEL DRIVEN GEAR
BEARING RETAINER
0020 00
THIS WORK PACKAGE COVERS:
Determining Nominal Shims for Output Bevel Driven Gear Bearing Retainer
DETERMINING NOMINAL SHIMS FOR OUTPUT BEVEL DRIVEN GEAR BEARING RETAINER
1. If original shim pack thickness is not known, or if certain new parts have replaced original parts, the nominal shim
thickness must be calculated, as outlined below:
2. Replacement of any of the following components may affect shim pack dimension required:
Bearing retainer
Transmission housing
Roller bearing assembly
Output bevel driven gear
3. Install bearing inner race (1) into hub of output bevel driven gear (2). Install outer race (3) on inner race.
2
3
1
