TM 9--2520--215--34
0020 00--2
DETERMINING NOMINAL SHIMS FOR OUTPUT BEVEL DRIVEN GEAR
BEARING RETAINER – CONTINUED
0020 00
DETERMINING NOMINAL SHIMS FOR OUTPUT BEVEL DRIVEN GEAR BEARING RETAINER – Continued
4. Measure and record dimension indicated by Y on figure 1 or 2. A method of making this measurement is shown.
Note that thickness of parallel bar must be subtracted from measurement obtained by depth micrometer to find Y
dimension.
5. Measure and record dimension indicated by Z on figure 1 or 2. Hold depth micrometer on retainer (4) surface.
4
6. Record dimension indicated by MD on figure 1 or 2. This dimension is etched on output bevel driven gear.
