TB 43-0213
(2) Use the same tool to completely coat the
(3) Insert 90 degree tool in holes A in the rear
back side of the cowl side panels. Gain access to the
cab braces and spray in all directions.
cowl side panels by inserting the tool under the
dashboard on the inside of the cab and spraying
CAUTION
forward to the left, right, up, and down.
Roll up windows. Do not coat any part of the
rigid tool to completely coat roof inner panel A,
window mechanisms while spraying.
including all supports.
90 degree short tool through existing openings in the
inside door panel A and completely coat inner panels of
doors.
TA504915
Figure 17-8. Rustproofing Roof.
h. Rustproofing Lower and Rear Door Frame (see
(1) Insert flexible tool into existing opening in
the rear pillar as far as possible, then spray in all
directions while slowly withdrawing tool.
(2) Use 90 degree short tool to completely coat
the underside of the lower door frame.
TA504917
Figure 17-10. Rustproofing Doors.
Use the 90 degree short tool with the cone spray tip to
coat the interior of the battery box A, including cover.
TA504916
Figure 17-9. Rustproofing Lower and Rear
TA504918
Door Frame.
Figure 17-11. Rustproofing Battery Box.
17-4